Max. capacity (Q) 4999 kg 11021 lbs
Max. lifting height (h3) 25.78 m 84 ft 7 in
Max. Reach (l4) 21.4 m 70 ft 3 in
Ground clearance (m4) 0.35 m 1 ft 2 in
Wheelbase (y) 3.05 mm 0.12 in
Length to face of forks (l2) 7.84 m 25 ft 9 in
Length of frame (l14) 5.35 m 17 ft 7 in
Overall length (with forks) (l1) 7.84 m 25 ft 9 in
Overall width (b1) 2.49 m 8 ft 2 in
Overall width with stabilisers extended (b7) 5.55 m 18 ft 3 in
Overall height (h17) 3.05 m 10 ft
Overall cab width (b4) 0.99 m 3 ft 3 in
Tilt-down angle (a5) 102 °
Tilt-up angle (a4) 13 °
Forks length / width / section (l/e/s) 1200 mm x 50 mm x 15 mm 3 ft 11 in x 2 in x 1 in
Turret rotation 360 °
Outer frame turning radius (Wa3) 5.23 m 17 ft 2 in
Internal turning radius (over tyres) (b13) 1.7 m 5 ft 7 in
Tyres type Pneumatic
Steering wheels (front / rear) 2 / 2
Drive wheels (front / rear) 2 / 2
Stabs Type Telescopic Duplex
Controls with stabs Stabs Commands Individual or Simultaneous
Engine brand Mercedes
Engine norm Stage IIIa / Tier 3
Engine model OM 904 LA. E3A/2
I.C. Engine power rating / Power (kW) 150 Hp / 110 kW
Max. torque / Engine rotation 1600 @ 1200 tr/min
Number of cylinders - Capacity of cylinders 3400 - 4250 cm³ 3400 - 259.35 in³
Injection engine Injection direct
Engine cooling system Water
Number of batteries 2
Battery / Batteries capacity 12 V / 120 A
Drawbar pull (Laden) 8700 daN
Transmission type Hydrostatic
Number of gears (forward / reverse) 2 / 2
Max. travel speed 40 km/h 24.9 mph
Parking brake Automatic Negative Hand-brake
Service brake Hydraulic
Hydraulic pump type Gear Pump
Hydraulic flow 115 l/min
Hydraulic Pressure 275 Bar 19 PSI
Hydraulic oil 225 l 49.49 gal
Fuel tank 305 l 67.09 gal
Noise at driving position (LpA) 77.4 dB(A)
Noise to environment (LwA) 107 dB(A)
Vibration to whole hand/arm < 2.50 m/s²
Controls 2 Joysticks
Safety cabin homologation Cab ROPS - FOPS Level 2
Attachment recognition system (E-Reco) Standard
Overall length at stabilisers (l12) 5.55 m 18 ft 3 in
Counterweight offset (turret at 90°) (a7) 3.18 m 10 ft 5 in
Front wheel gauge (b10) 2.05 m 6 ft 9 in
Outer turning radius (with forks) (b15) 5.23 m 17 ft 2 in
Frame Levelling Corrector (a9) 8 °
Operators Licence Contact Us
